AirLive WT-2000R Guia do Utilizador

AirLive WT-2000ARM ADSL2/2+ Router 1 WT-2000 ARM Wireless ADSL 2/2+ Modem Router User’s Guide

62. Hardware Installation Step 1. Connect the ADSL Line Connect the router to your ADSL cable through the supplied RJ-11 telephone line. Step 2. Con

73. Setup Wizard This router provides a Setup Wizard tool for user to configure the ADSL settings. This wizard collects some ISP’s ADSL settings so t

82. The following screen will be displayed. Click “Setup Wizard”. 3. This wizard will be executed and try to search for the ADSL Router.

9 4. If the router cannot be found, please enter the IP Address and the Password of the router to search again. Click “Next” to continue. 5. Plea

10 6. Please select the ISP (Internet Service Provider) of your ADSL service. 7. Enter the Username and Password which your ISP has provided to yo

11 8. Click “Save” to save the settings and reboot the router. 9. After saving and rebooting the router, the ISP settings are all finished. This

12 10. The ISP settings are all finished. If you want to configure more settings, please click “Advanced Settings” or click “Finish” to close the wiz

134. IP Address Setting Using the router to get into the Internet, the PCs in the network must have Ethernet adapter installed and be connected to th

144. In the Internet Protocol (TCP/IP) Properties window, select Obtain an IP address automatically and Obtain DNS server address automatically as s

15Windows 2000 1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2. Double-click Net

AirLive WT-2000ARM ADSL2/2+ Router 2 Copyright The contents of this publication may not be reproduced in any part or as a whole, stored, transcribe

166. Click OK to confirm the setting. Your PC will now obtain an IP address automatically from your Broadband Router’s DHCP server. Note: Please mak

17Windows 95/98/Me 1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2. Double-click N

187. Check each of the tabs and verify the following settings: Bindings: Check Client for Microsoft Networks and File and printer sharing for Micros

19Windows NT 1. Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2. Double-click Networ

206. Check each of the tabs and verify the following settings: IP Address: Select Obtain an IP address from a DHCP server. DNS: Let all fields are b

215. Web Management Configuration Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP server will automaticall

22The HOME page screen below will appear. The Home Page is divided into seven sections: Quick Start, Interface Setup, Advanced Setup, Access Manageme

23 Access Management (Section 5.4) It allows you to configure ACL, IP Filter, SNMP, UPnP and DDNS functions. Maintenance (Section 5.5) If you wan

24 5.1. Quick Start The Quick Start section is designed to get you using the router as quickly as possible. Before configuring the router, please c

25 In the Quick Start, click “Run Wizard” to start the configuration.

AirLive WT-2000ARM ADSL2/2+ Router 3 Contents 1. INTRODUCTION ...1 1.1. FEATURES...

26 Please follow the steps in the setup wizard to complete the configuration of the Internet connection. Step 1: Set your new password Please

27 Step 2: Choose your tome zone Please select the tome zone where you are located. Step 3: Set your Internet connection Please check with your I

28 Step 4: Input the data supplied by your ISP To know more about the explanation of each setting, please refer to Section 5.2. Step 5: Re-start y

29 5.2. Interface Setup 5.2.1. Internet

30 z ATM VC Parameter Description Virtual Circuit VPI (Virtual Path Identifier) and VCI (Virtual Channel Identifier define a virtual circuit. V

31 nrtVBR (non-real time Variable Bit Rate) – This class allows users to send traffic at a rate that varies with time depending on the availability o

32xDSL modem. z Dynamic IP Address/Static IP Address/PPPoE/PPPoA/Bridge Mode After you have selected the ISP Type, this web page will

33 Connect On-Demand – Only connect when you want to surf the Internet. “Close if idle for xx minutes” is set to stop the connection when the networ

34destinations not known by the router's routing table are sent to the default route. By default, it is enabled. TCP MTU Option MTU (Maximum

35 z Router Local IP Parameter Description IP Address Enter the IP Address of the ADSL router for the local user to access the router’s web page

AirLive WT-2000ARM ADSL2/2+ Router 4 5.5. MAINTENANCE ...59 5.5.1. Administrator ...

36Only” or “OUT Only”. Multicast Specify the method of transmitting data simultaneously to many receivers. Please select “IGMP v1” or “IGMP v2” a

37DNS server will find that name in its index and the matching IP address. Please select “Use Auto Discovered DNS Server Only” to auto set the DNS Se

38 z Wireless LAN Parameter Description Access Point Activated or deactivated the wireless function of the router. When it is activated, the rou

39clients can scan the router within the network. Select “No” if you want to hide the SSID of the router. Wireless clients have to set the same SSID

40uses TKIP for data encryption. When “WPA-PSK” is selected, please enter 8-64 characters as the “Pre-Shared Key”. WPA2-PSK WPA2-PSK is also for h

41you can set the router to this mode. 802.11 g – This router will only work in 802.11g mode. If there are only 802.11g wireless clients in the ne

42 Parameter Description Firewall When you enable the firewall function, it will protect you from following attacks of WAN side: z SYN flooding a

43 z Routing Table List You can see the current routing table of the router here. If you want to add another routing rule, please click “ADD ROUTE”

44LAN. This is the IP of the neighbor router that this router should communicate with on the path to the destination LAN. Metric The number of hop

45If you have another router with a LAN-to-LAN connection, you may need to create a static routing on the router that is the gateway to Internet.

11. Introduction Congratulations on purchasing this 802.11g Wireless LAN ADSL2+ Router. This router is a cost-effective ADSL2+ router, with the combi

465.3.3. NAT 5.3.3.1. NAT Network Address Translation (NAT) allows multiple users at your local site to access the Internet through a single Publi

475.3.3.2. DMZ The DMZ Host is a local computer exposed to the Internet. When setting a particular internal IP Address as the DMZ Host, all incoming

485.3.3.3. Virtual Server Use the Virtual Server function when you want different servers/clients in your LAN to handle different service/Internet ap

49Parameter Description Local IP Address It is recommended to enter a static IP Address for the server here. If the server’s IP Address is obtained

505.3.4. ADSL Parameter Description ADSL Mode The default setting is “Auto Sync-Up”. This mode will automatically detect the ADSL mode including

515.4. Access Management 5.4.1. ACL If you want to restrict users from accessing certain Internet applications/services such as Internet websites, em

52Parameter Description Secure IP Address The default 0.0.0.0 allows any user to use this service to remotely manage the router. Type an IP Address

53 z IP Filter Set Editing Parameter Description IP Filter Set Index This is the item number to record the setting. Interface Select which cha

54Port Number This is the port or port ranges that define the application.Parameter Description Protocol It is the packet protocol type used by th

55 5.4.3. SNMP Simple Network Management Protocol (SNMP) is a popular protocol for network management. It is used for collecting information and conf

21.1. Features ADSL2/2+ Compliance • Support downstream rates of up to 24Mbps and upstream rates of up to 1Mbps. • Compliant to ITU-T G.992.1 (G.dm

565.4.4. UPnP When the UPnP function is enabled, the router can be detected by UPnP compliant system such as Windows XP. The router will be displayed

575.4.5. DDNS DDNS allows you to map the static domain name to a dynamic IP address. You must get an account, password and your static domain name fr

58Parameter Description Password Enter the password you set for the DDNS service. Wildcard Support Enable or disable the wildcard to stand for s

595.5. Maintenance 5.5.1. Administrator Parameter Description Username The username of the router is “admin” by default. New Password Enter u

605.5.2. Time Zone The Time Zone allows your router to set its time; this will affect function such as System Log. Parameter Description Current

615.5.3. Firmware If you have new firmware for some features update, please upgrade firmware of the router here. Parameter Description New Firmwa

625.5.4. System Restart In this page, you can restart your router or restore to factory defaults. If you wish to restart the router using the factory

635.5.5. Diagnostics This page allows you to diagnose the connectivity of the LAN and WAN network.

645.6. Status 5.6.1. Device Info In this page, you can know the device information including firmware, MAC Address, LAN and WAN settings and also the

655.6.2. System Log Display system logs accumulated up to the present time. You can also save the logs for future reviewing.

31.2. Minimum Requirements The following devices are necessary to configure and use the ADSL2+ Router: • A PC with Pre-installed Ethernet Adapter (R

66 5.6.3. Statistics Show the statistics of transmit and receive packets on the LAN port and the ADSL line.

676. Troubleshooting 1. The LAN LED on the front panel does not light up. STEPS CORRECTIVE ACTION 1 Check the Ethernet cable connections between y

68The following procedures will help you to check the current IP Address setting of your computer. You can compare if your computer and router’s IP A

694. I forget my login username and/or password. STEPS CORRECTIVE ACTION 1 If you have changed the password and have now forgotten it, you will ne

706. Initialization of the ADSL connection failed. STEPS CORRECTIVE ACTION 1 Check the cable connections between the ADSL port and the wall jack.

717. Glossary 10Base-T It is an Ethernet standard for Local Area Network (LAN). 10Base-T uses a twisted pair cable with maximum length of 100 meters.

72CPE Customer Premises Equipment, such as ADSL router, USB modem. Default Gateway (Router) Every non-router IP device needs to configure a default

73FTP File Transfer Protocol. The Internet protocol (and program) used to transfer files between hosts. Idle Timeout Idle Timeout is designed so tha

74NAT Network Address Translator is defined by RFC 1631. Enable a LAN network to use one set of IP address for internal traffic. A NAT box located wh

75PPPoA (RFC 2364) The Point-to-Point Protocol (PPP) provides a standard method for transporting multi-protocol data grams over point-to-point links.

41.4. Hardware Placement 1.4.1. Rear Panel 1) Antenna Connector The antenna connector of the router is reverse SMA connector. It allows you to con

76Router A system responsible for making decisions about which of several paths network (or Internet) traffic will follow. To do this, it uses a rout

77WAN Wide Area Network is a network that connects computers located in geographically separate areas (e.g. different buildings, cities, countries).

5The router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc. 5) ADSL Connect the supplied RJ-11 telephone