AirLive WLA-5200AP Manual do Utilizador

WLA-5200AP 802.11a/b/g Multi-function Wireless Access Point User’s Manual

HARDWARE CONNECTION Note: Before you starting hardware connection, you are advised to find an appropriate location to place the Access Point. Usuall

ABOUT THE WIRELESS OPERATION MODES This device provides seven operational applications with AP, Bridge, Client (Ad-hoc), Client (Infrastructure) ,W

Client Mode (Infrastructure) If set to Client (Infrastructure) mode, this device can work like a wireless station when it’s connected to a computer

Bridge Mode You will be able to connect two wireless LANs together under the Bridge mode. This only works with another Wireless a/b/g Access Point.

WDS Repeater Mode A repeater's function is to extend the wireless coverage of another wireless AP or router. For WDS repeater to work, the remo

Universal Repeater Mode A universal repeater can also extend the wireless coverage of another wireless AP or router without requiring the remote devi

WISP (Client Router) ModeWISP (Client Router) mode In WISP mode, the AP will behave just the same as the Client mode for wireless function. However,

CONFIGURATION Login 1. Start your computer. Connect an Ethernet cable between your computer and the Wireless Access Point. 2. Make sure your wire

System System Shows the product model name. Product Model The current version of the firmware installed in this device. Firmware Version Shows the

Active Client Shows the information of the devices that are currently associating with this Wireless Access Point. Wireless Mode Wireless mode Thi

Clause Description EN 301 893 v1.2.3 Broadband Radio Access Network(BRAN); 5GHz high (2003-08) performance RLAN; Harmonized EN Covering essentia

AP modes The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Alias Name  Disabl

16 WLA-5200AP v2 User’s Manual in the n

Client Mode Settings The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Alias Nam

18 WLA-5200AP v2 User’s Manual network.

Fragmentation mechanism is used for improving the efficiency when high traffic flows along in the wireless network. If your 802.11g Wireless LAN P

20 WLA-5200AP v2 User’s Manual Point, i

Enable Watch DogWatch Interval Watch Host Check the box to enable this watch dog function and set the Watch dog time Interval (1~60 mins) and type th

Authentication Type: WPA-PSK/WPA2-PSK If WPA-PSK/WPA2-PSK is selected, users will have to select the Encryption from the pull-down list, TKIP, AES

Bridge Mode Setting The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Alias Name

Allow user to set the channel manually or automatically. If set channel manually, just select the channel you want to specify. If “Auto” is selected,

WLA-5200AP CE Declaration Statement Country Declaration Country Declaration cs Česky [Czech] OvisLink Corp. tímto prohlašuje, že tento WLA-5200AP je

25 WLA-5200AP v2 User’s Manual wireless

26 WLA-5200AP v2 User’s Manual whether

Security (Bridge/Repeater Mode) Here you can configure the security of your wireless network. Selecting different method will enable you to have di

Authentication Type: WPA-PSK/WPA2-PSK If WPA-PSK/WPA2-PSK is selected, users will have to select the Encryption from the pull-down list, TKIP, AES

Authentication Type: Open System with 802.1x/WPA-RADIUS/WPA2-RADIUS If the Open System with 802.1x/WPA-RADIUS/WPA2-RADIUS is selected, users w

WDS Control WDS MAC Table CreateYou may enter up to 20 characters as a remark to the previous MAC Address. Device Comment Enter the MAC Address

Repeater Mode Settings The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Alias Na

32 WLA-5200AP v2 User’s Manual network.

Select the Access Control Mode from the pull-down menu. Disable: Select to disable Wireless Access Control Mode. Allow: Only the stations shown in

WISP mode Settings The distinguishing name of this device, you may change the default alias name by entering a new one in this column. Alias Name

FCC Certifications This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Ru

You can choose the Ad-Hoc mode and Infrastructure mode Network Type The SSID differentiates one WLAN from another; therefore, all access points and

Virtual Server Define virtual server ip address and port range, Protocol and check the box to enable virtual server, The Virtual server which using

Remote Mangement You can enable the Remote management function and define the port number let can be managed from internet . WISP + Universal Repe

38 WLA-5200AP v2 User’s Manual Alias Na

Site Survey Click site survey setup button that will shows the WISP Outdoor AP list and you can select which WISP AP you want to connect . Please r

Special Application You can define special application that can allow outside users to access your internal application behind this AP, like QuickTi

TCP/IP Basic In this page, you can change the TCP/IP settings of this Access Point, select to enable/disable the DHCP Client, 802.1d Spanning Tree, a

Press to save the new settings on the screen. Apply Changes Press to discard the data you have entered since last time you press Apply Change. Res

This function enables users to save the current configurations as a file (i.e. config.bin) To load configuration from a file, enter the file name or

Set your new User name. User name can be up to 15 characters long. User name can contain letter, number and space. It is case sensitive. User Name

Table of Contents INTRODUCTION...1 FEATURES ..

1 WLA-5200AP v2 User’s Manual INTRODUCT

Application Example 1 Example 2 2

Parts Names and Functions 1. Front Panel: (LED Indicators) LED Status Indicator Color Solid Flashing Power Yellow Turns solid green when the po

Port/button Functions Use standard LAN cables (RJ45 connectors) to connect your PCs to these ports. If required, any port